The user meant the chat channel's "answer every message", not the voice
policy "in order": the LLM takes two or more requests at once only while a
chat channel answers every message, otherwise one whatever the voice policy.
The roadmap and the open measurements point at the new gamemode_stt and
gamemode_live stages, which also decide whether the STT moves to the CPU
during a game.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The M0 stt stage measured 1300 MiB for the model and another 1440 MiB while
transcribing ten speakers at once. The game share now subtracts the 2.7 GB
peak: about 3.1 GB on the 16 GB game PC (not 4.6 GB), and the 2 GB expert
placement returns at a reserve of about 2.2 GB. Both are marked as sums of
separate LLM and STT runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The user chose one request at a time by default (97 tok/s on a 16 GB card
against 70-75 with two) and two or more only under the "in order" policy,
which answers every request. The second gamemode run showed a 16 GB card
cannot free 8 GB for a game: the smallest placement still leaves 6.3 GB.
The Strata 0.1.59 qwen36 engine source confirms why --kv and --mtp off made
no difference: it takes no --kv flag and always loads the MTP block. The
game placement is now one request, CPU vision, 8 workers, 16K context and a
computed expert share, falling back to the minimum placement on this PC.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The first game PC run showed that a 2 GB expert budget still left a 16 GB
card only 4.3 GB free: the weights, the 32K int8 conversation memory, the
MTP drafter and buffers take about 8.7 GB on their own. The game placements
now also shrink the memory format (q4_0), the context (16K, 8K) and the
drafter, with half the CPU workers (no speed cost measured). The engine log
is appended across starts, so each placement now reads only its own lines;
when no placement leaves the reserve the result names the most free one.
The gamemode runner skips the desktop stage, which is already measured.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The gamemode stage was "ok" when only the normal placement started; a
placement that does not start, or a measurement error inside one, now marks
the stage partial. The design no longer raises the expert budget above the
computed one: it shrinks the game reserve to what the smallest placement
leaves, shows that, and pauses the LLM during games when nothing is left.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Drop the recommended model (Qwen3.8-Flash-Next) and the experimental one:
Qwen3.6-35B-A3B passed every tool call and answers first. Replace game-mode
actions (a)(b)(c) with automatic tuning: a normal and a game placement of the
same model, computed per PC from VRAM, a first-run self-check that lowers
defaults on slow PCs, and latency watching that lowers restart-free settings
first. Record the agent-desktop results and choose the per-call CLI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add a 'desktop' stage to the M0 kit that installs the pinned agent-desktop
1.2.0 Windows build (SHA-256 checked) and checks, on the gaming PC:
calculator buttons by automation id (12+3=15), set-value and read-back on
a test page in a throwaway browser profile, Discord/Explorer read time,
and a warm MCP server against one CLI process per call. Results keep only
counts, timings, error codes and the calculator digits.
Record agent-desktop (UI Automation) as the planned M7 control path in the
v2 design docs, with raw Windows input only for screens without
accessibility.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Keep the fast model as the default: the recommended model decodes faster
(131 vs 82 tok/s) but starts every voice answer, long-context reply and
image answer later. Note its working VRAM shrink for game mode and its
fabricated weather answer for the M3 evals.
A named share question now captures the popout straight away when that
person is sharing, even with several sharers (user decision).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Only capture a named person's share when they are the sole streamer or
the user has confirmed the selection in the popout. A timeout no longer
captures whatever is showing, a non-streaming target gets an honest
answer, and clicking the popout after confirmation asks again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Discord allows only one popped-out share window and picks the stream
inside it, so there is never a choice between windows. Use the voice
channel's streaming state instead: one streamer means capture directly,
two or more means asking the user to pick that person in the popout
when the requested person changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The first run left three results out of the plan: the fast model skipped
the timer tool and claimed it was set, the popped-out share window carries
the voice channel name rather than the streamer's, and a covered popout
keeps drawing. The recommended model failed to start (DFlash2 needs a
native pack), so M0 stays open for that one stage with the fixed kit.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The user wants the app to work on any Windows PC from its own installer,
so the Parsec driver is a test aid for M0, not a product dependency.
Scope the target to x64 Windows 10/11 outside S mode (ARM64 needs WHQL)
and re-verify the Discord share, cursor and unplug behaviour with the
driver that ships.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The user wants the bot window on no real screen at all. Add a vdisplay
stage that drives the Parsec Virtual Display Adapter already on the PC
(no install, the display dies with the script), moves the clock window
onto it as a normal and as a tool window, and asks about real monitors,
Alt+Tab, Discord's Screens tab and whether the cursor can wander there.
Record the M0 defaults the user confirmed in docs/v2.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
- Chat channel name/description edits also rename the real Discord
channel and topic by default (toggle kept)
- Memory: separate toggles for registered chat channels and other
speakers in the same voice channel, both on by default
- Screen-share popout is requested by voice, never automated
- v1 head bb60c4d preserved as the remote legacy branch
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Replace the root README with the v2 plan (game PC fully local, Windows
management app) and split the plan into docs/v2/*.md: architecture,
voice-and-llm, conversation, memory, desktop-app, pc-features, privacy,
roadmap, decisions. The v1 README moves to docs/v1/README.md with its
relative links fixed; .env.example points to the new location.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>