feat: 버전 독립 P2P 터널 모드 초기 구현

jar 하나로 모든 마인크래프트 버전을 지원해야 한다는 요구를 만족시키기 위해
마인크래프트 클래스를 전혀 참조하지 않는 구조로 설계했다. 26.1부터 게임이
비난독화되면서 Yarn/intermediary 가 폐지돼, 게임 클래스를 참조하는 jar 는
1.21.x 와 26.x 경계를 넘을 수 없다 — 버전별 빌드를 피할 유일한 길이다.

게임에서 필요한 두 가지를 자바 API 대신 네트워크 프로토콜로 얻는다.
호스트의 통합 서버 포트는 바닐라 "LAN 에 공개" 가 쏘는 멀티캐스트 비콘에서
읽고, 참가자에게는 같은 비콘을 우리가 쏘아 LAN 목록에 방을 띄운다. 덕분에
믹스인 0개, 버전 분기 0개, Loom·매핑 없는 평범한 자바 빌드가 됐다.

전송은 순수 자바 QUIC(Kwik)을 골랐다. 네이티브 WebRTC 대비 번들이 30MB →
0.71MB 로 줄고 아키텍처 제약이 사라진다. NAT 우회는 후보를 병렬로 시도하되
직결에 600ms 유예를 줘서, 항상 먼저 성공하는 중계가 직결을 밀어내지 않게 했다.
중계는 UDP 데이터그램을 그대로 넘기므로 직결과 터널 코드가 동일하고 QUIC
TLS 1.3 이 종단간이라 중계 서버는 트래픽을 읽을 수 없다.

초대코드는 120비트 난수 자체이고 서버에 등록되는 방 ID 는 그 해시에서
파생된다. 시그널링 서버 운영자도 방에 참가하거나 호스트를 사칭할 수 없다.

검증: 57개 테스트 전부 통과. 직결·중계 양쪽에서 터널이 실제 소켓으로 왕복하고,
512KB 전송, 초대코드 불일치 거절, 지문 불일치 차단, 실제 멀티캐스트 비콘
송수신, 시그널링 프로토콜, 웹 콘솔 HTTP 를 포함한다. 마인크래프트 클래스
참조 0개는 컴파일된 클래스의 상수 풀을 뒤지는 테스트로 강제한다.

실제 게임 클라이언트 접속과 실 NAT 홀펀칭 성공률은 아직 미검증이며
docs/DESIGN.md 에 남은 과제로 정리했다.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

gradlew

@@ -0,0 +1,248 @@
+#!/bin/sh
+
+#
+# Copyright © 2015 the original authors.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#      https://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# SPDX-License-Identifier: Apache-2.0
+#
+
+##############################################################################
+#
+#   Gradle start up script for POSIX generated by Gradle.
+#
+#   Important for running:
+#
+#   (1) You need a POSIX-compliant shell to run this script. If your /bin/sh is
+#       noncompliant, but you have some other compliant shell such as ksh or
+#       bash, then to run this script, type that shell name before the whole
+#       command line, like:
+#
+#           ksh Gradle
+#
+#       Busybox and similar reduced shells will NOT work, because this script
+#       requires all of these POSIX shell features:
+#         * functions;
+#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
+#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
+#         * compound commands having a testable exit status, especially «case»;
+#         * various built-in commands including «command», «set», and «ulimit».
+#
+#   Important for patching:
+#
+#   (2) This script targets any POSIX shell, so it avoids extensions provided
+#       by Bash, Ksh, etc; in particular arrays are avoided.
+#
+#       The "traditional" practice of packing multiple parameters into a
+#       space-separated string is a well documented source of bugs and security
+#       problems, so this is (mostly) avoided, by progressively accumulating
+#       options in "$@", and eventually passing that to Java.
+#
+#       Where the inherited environment variables (DEFAULT_JVM_OPTS, JAVA_OPTS,
+#       and GRADLE_OPTS) rely on word-splitting, this is performed explicitly;
+#       see the in-line comments for details.
+#
+#       There are tweaks for specific operating systems such as AIX, CygWin,
+#       Darwin, MinGW, and NonStop.
+#
+#   (3) This script is generated from the Groovy template
+#       https://github.com/gradle/gradle/blob/2d6327017519d23b96af35865dc997fcb544fb40/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
+#       within the Gradle project.
+#
+#       You can find Gradle at https://github.com/gradle/gradle/.
+#
+##############################################################################
+
+# Attempt to set APP_HOME
+
+# Resolve links: $0 may be a link
+app_path=$0
+
+# Need this for daisy-chained symlinks.
+while
+    APP_HOME=${app_path%"${app_path##*/}"}  # leaves a trailing /; empty if no leading path
+    [ -h "$app_path" ]
+do
+    ls=$( ls -ld "$app_path" )
+    link=${ls#*' -> '}
+    case $link in             #(
+      /*)   app_path=$link ;; #(
+      *)    app_path=$APP_HOME$link ;;
+    esac
+done
+
+# This is normally unused
+# shellcheck disable=SC2034
+APP_BASE_NAME=${0##*/}
+# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
+APP_HOME=$( cd -P "${APP_HOME:-./}" > /dev/null && printf '%s\n' "$PWD" ) || exit
+
+# Use the maximum available, or set MAX_FD != -1 to use that value.
+MAX_FD=maximum
+
+warn () {
+    echo "$*"
+} >&2
+
+die () {
+    echo
+    echo "$*"
+    echo
+    exit 1
+} >&2
+
+# OS specific support (must be 'true' or 'false').
+cygwin=false
+msys=false
+darwin=false
+nonstop=false
+case "$( uname )" in                #(
+  CYGWIN* )         cygwin=true  ;; #(
+  Darwin* )         darwin=true  ;; #(
+  MSYS* | MINGW* )  msys=true    ;; #(
+  NONSTOP* )        nonstop=true ;;
+esac
+
+
+
+# Determine the Java command to use to start the JVM.
+if [ -n "$JAVA_HOME" ] ; then
+    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+        # IBM's JDK on AIX uses strange locations for the executables
+        JAVACMD=$JAVA_HOME/jre/sh/java
+    else
+        JAVACMD=$JAVA_HOME/bin/java
+    fi
+    if [ ! -x "$JAVACMD" ] ; then
+        die "ERROR: JAVA_HOME is set to an invalid directory: $JAVA_HOME
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+else
+    JAVACMD=java
+    if ! command -v java >/dev/null 2>&1
+    then
+        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+
+Please set the JAVA_HOME variable in your environment to match the
+location of your Java installation."
+    fi
+fi
+
+# Increase the maximum file descriptors if we can.
+if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
+    case $MAX_FD in #(
+      max*)
+        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        MAX_FD=$( ulimit -H -n ) ||
+            warn "Could not query maximum file descriptor limit"
+    esac
+    case $MAX_FD in  #(
+      '' | soft) :;; #(
+      *)
+        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
+        ulimit -n "$MAX_FD" ||
+            warn "Could not set maximum file descriptor limit to $MAX_FD"
+    esac
+fi
+
+# Collect all arguments for the java command, stacking in reverse order:
+#   * args from the command line
+#   * the main class name
+#   * -classpath
+#   * -D...appname settings
+#   * --module-path (only if needed)
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and GRADLE_OPTS environment variables.
+
+# For Cygwin or MSYS, switch paths to Windows format before running java
+if "$cygwin" || "$msys" ; then
+    APP_HOME=$( cygpath --path --mixed "$APP_HOME" )
+
+    JAVACMD=$( cygpath --unix "$JAVACMD" )
+
+    # Now convert the arguments - kludge to limit ourselves to /bin/sh
+    for arg do
+        if
+            case $arg in                                #(
+              -*)   false ;;                            # don't mess with options #(
+              /?*)  t=${arg#/} t=/${t%%/*}              # looks like a POSIX filepath
+                    [ -e "$t" ] ;;                      #(
+              *)    false ;;
+            esac
+        then
+            arg=$( cygpath --path --ignore --mixed "$arg" )
+        fi
+        # Roll the args list around exactly as many times as the number of
+        # args, so each arg winds up back in the position where it started, but
+        # possibly modified.
+        #
+        # NB: a `for` loop captures its iteration list before it begins, so
+        # changing the positional parameters here affects neither the number of
+        # iterations, nor the values presented in `arg`.
+        shift                   # remove old arg
+        set -- "$@" "$arg"      # push replacement arg
+    done
+fi
+
+
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
+
+# Collect all arguments for the java command:
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
+#     and any embedded shellness will be escaped.
+#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
+#     treated as '${Hostname}' itself on the command line.
+
+set -- \
+        "-Dorg.gradle.appname=$APP_BASE_NAME" \
+        -jar "$APP_HOME/gradle/wrapper/gradle-wrapper.jar" \
+        "$@"
+
+# Stop when "xargs" is not available.
+if ! command -v xargs >/dev/null 2>&1
+then
+    die "xargs is not available"
+fi
+
+# Use "xargs" to parse quoted args.
+#
+# With -n1 it outputs one arg per line, with the quotes and backslashes removed.
+#
+# In Bash we could simply go:
+#
+#   readarray ARGS < <( xargs -n1 <<<"$var" ) &&
+#   set -- "${ARGS[@]}" "$@"
+#
+# but POSIX shell has neither arrays nor command substitution, so instead we
+# post-process each arg (as a line of input to sed) to backslash-escape any
+# character that might be a shell metacharacter, then use eval to reverse
+# that process (while maintaining the separation between arguments), and wrap
+# the whole thing up as a single "set" statement.
+#
+# This will of course break if any of these variables contains a newline or
+# an unmatched quote.
+#
+
+eval "set -- $(
+        printf '%s\n' "$DEFAULT_JVM_OPTS $JAVA_OPTS $GRADLE_OPTS" |
+        xargs -n1 |
+        sed ' s~[^-[:alnum:]+,./:=@_]~\\&~g; ' |
+        tr '\n' ' '
+    )" '"$@"'
+
+exec "$JAVACMD" "$@"