1 Commits

Author SHA1 Message Date
EJClaw
85f5782876 voice-changer installer: never touch the chosen folder with admin rights (1.0.3)
Review of c24cd1f: with a user-owned parent (Desktop), the user could swap the chosen folder for a junction
to a protected folder after secure-dir Prepare, and the elevated Finish would grant Users modify on the
target's config\ etc. Any elevated path operation on a user-controlled path has this race, so the elevated
installer now only works in Program Files.

- VoiceChanger.iss: {app} is always {commonpf}\VoiceChanger (apo\, scripts\mic-apo.ps1, scripts\deploy.ps1,
  uninstall\, payload\). The user's folder comes from a custom page (/DATADIR=, previous DataDir, or the
  v1.0.x App Path) and is only read for checks. deploy.ps1 runs with ExecAsOriginalUser: copies payload,
  moves data folders of an older install, runs install.ps1. Shortcuts are created after the copy
  (CreateShellLink; [Icons] made empty-target links) and the postinstall launch runs as the original user.
  Uninstall restores the mic settings and removes Program Files only; the user's folder is left (message).
- legacy.ps1 (replaces secure-dir.ps1): for a v1.0.0/1.0.1 folder (admin-locked, uninstall\ inside) deletes the
  old executable parts by name, moves the mic backup to Program Files and renames the folder to <dir>.old,
  only if no non-admin principal can delete/rename the folder or any ancestor (owner + ACL check; ACLs can
  only be changed by admins, so the check stays valid during the operation). Otherwise refuses (exit 20).
- deploy.ps1 (user level): refuses a junction; a v1.0.2 admin-locked folder under a user-owned parent is
  renamed aside by the user and its data folders moved into a fresh folder.
- mic-apo.ps1: back to its pre-c24cd1f logic (no -From); header documents the Program Files root.

Windows 11 VM, Inno 6.7.4, AppVersion 1.0.3:
- J: chosen folder = junction to admin-owned C:\vctarget (config\keep.txt, protected ACL): setup exit 0,
  legacy exit 0, deploy exit 31; target files + SDDL unchanged after setup, after limited-token deploy
  (exit 31), after limited-token write/icacls/rename attempts (all denied), and after uninstall.
- J2: same target with uninstall\unins000.exe: legacy exit 20, setup aborted (exit 7), target unchanged.
- U1: v1.0.1 at C:\VoiceChanger -> 1.0.3 with the default folder: legacy exit 1, backup moved byte-equal,
  models\mine.txt kept, C:\VoiceChanger.old removed, APO from Program Files; uninstall restores FxProperties.
- U2: v1.0.2 on Desktop -> limited-token deploy renamed it aside, moved models, new folder owned by the user;
  1.0.3 setup on it exit 0; uninstall restores FxProperties, folder and models kept.
- D: fresh Desktop install with full engine download: deploy exit 0, admin_root = Program Files,
  audiodg loads the Program Files DLL, APO 440 Hz + Communications PASS, Start menu/desktop shortcuts point
  at <Desktop>\VoiceChanger\VoiceChanger.exe and are removed on uninstall.
- python unittest: 16 run, 2 skipped (tkinter missing).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-11 22:51:52 +09:00
6 changed files with 326 additions and 295 deletions

View File

@@ -13,7 +13,7 @@
1. `VoiceChangerSetup.exe` 를 실행합니다 (관리자 권한 확인 창이 뜹니다).
2. **설치할 폴더**를 고릅니다. 기본값은 `C:\VoiceChanger` 이고, 다른 드라이브(`D:\...`)나 한글 · 띄어쓰기가 들어간 경로도 됩니다.
비어 있는 폴더나 새 폴더만 됩니다 (다른 파일이 든 폴더는 거절합니다). 바탕 화면 · 문서 아래(예: `바탕 화면\VoiceChanger`)도 됩니다. OneDrive 로 동기화되는 폴더를 고르면 한 번 더 묻습니다.
Python · 엔진 · torch · 목소리 모델 · 설정 · 학습 파일 · 캐시 · 임시 파일이 **모두 이 폴더 안에만** 저장됩니다.
앱 · Python · 엔진 · torch · 목소리 모델 · 설정 · 학습 파일 · 캐시 · 임시 파일이 **모두 이 폴더 안에만** 저장됩니다.
설치하면서 약 8GB 를 내려받고 모델을 만들수록 늘어나므로 15GB 이상 비어 있는 드라이브를 고르세요.
3. 설치 프로그램이 마이크마다 변환 모듈을 붙이고(윈도우 소리가 1~2초 끊김), 검은 창에서 Python 3.12 · 엔진(Applio) ·
torch(CUDA 12.8) · 엔진 기본 모델(rmvpe · contentvec · 사전학습 가중치 · ffmpeg)을 그 폴더로 내려받습니다. 10~20분 걸립니다.
@@ -24,15 +24,18 @@
디스코드 · 게임의 입력 장치는 **평소 쓰던 마이크 그대로** 두면 됩니다.
- 내려받다가 끊기면 설치 폴더의 `install.bat` 을 실행합니다. 받은 곳부터 이어서 받습니다.
- 권한: 관리자 권한 · 오디오 서비스가 실행하는 마이크 모듈(`apo\`) · `mic-apo.ps1` · 제거 프로그램은 고른 폴더가 아니라 `C:\Program Files\VoiceChanger` 에 설치합니다 (고른 폴더의 상위가 사용자 소유여도 폴더를 바꿔쳐 관리자 권한을 얻지 못하게). 설치 프로그램은 고른 폴더의 소유자도 Administrators 로 바꾸고 잠근 뒤 확인합니다(`installer\secure-dir.ps1`, 실패하면 설치 중단). 설치 폴더와 실행 파일 · `app\` · `scripts\` 는 관리자만 고칠 수 있습니다. 일반 사용자는 `models` · `training` · `datasets` · `config` · `cache` · `env` · `engine` · `tools` 에만 씁니다. 엔진 내려받기(`install.ps1`)는 관리자 권한 없이 돕니다.
- 권한: 관리자 권한 · 오디오 서비스가 실행하는 마이크 모듈(`apo\`) · `mic-apo.ps1` · 제거 프로그램은 `C:\Program Files\VoiceChanger` 에 설치합니다 (관리자만 고칠 수 있음).
고른 폴더는 관리자 권한으로 건드리지 않습니다. 앱 파일 복사(`installer\deploy.ps1`)와 엔진 내려받기(`install.ps1`)는 설치를 시작한 사용자 권한으로 합니다.
바탕 화면처럼 상위가 사용자 소유인 폴더는 설치 도중 다른 곳을 가리키는 정션으로 바꿔칠 수 있어서, 관리자 권한으로 그 경로를 다루면 엉뚱한 곳이 바뀔 수 있기 때문입니다.
v1.0.1 까지 관리자 소유로 잠가 둔 설치 폴더는 설치 프로그램이 이전 실행 파일만 지우고 `<폴더>.old` 로 비켜 둔 뒤(`installer\legacy.ps1`, 상위가 관리자 소유일 때만) 모델 · 설정 · Python · 엔진을 새 폴더로 옮깁니다.
- 폴더 밖에 남는 것은 윈도우가 관리하는 항목뿐입니다: 시작 메뉴 바로 가기, 프로그램 제거 목록, 마이크 모듈 등록(레지스트리).
사용자 폴더(`%APPDATA%` · `%LOCALAPPDATA%` · `%TEMP%` · `.cache`)에는 아무것도 쓰지 않습니다.
- 제거: 설정 → 앱 → 음성 변환기 → 제거. 마이크 설정을 원래대로 되돌리고, 만든 모델 · 녹음 · 설정까지 지울지 묻습니다.
- 제거: 설정 → 앱 → 음성 변환기 → 제거. 마이크 설정을 원래대로 되돌리고 `C:\Program Files\VoiceChanger` 를 지웁니다. 고른 폴더(앱 · 모델 · 녹음 · 설정)는 남기므로 필요 없으면 직접 지웁니다 (내 계정 폴더라 관리자 권한 없이 지울 수 있음).
### 마이크 모듈은 어떻게 동작하나
윈도우는 마이크 소리를 앱에 넘기기 전에 오디오 처리 모듈(APO, Equalizer APO 와 같은 방식)을 거칩니다.
설치 프로그램이 `C:\Program Files\VoiceChanger\apo\VoiceChangerAPO.dll` 을 각 마이크의 처리 단계에 붙입니다 (`scripts\mic-apo.ps1`, 바꾼 값의 원래 값은 같은 곳의 `apo\mic-apo-backup.json`, 이전 버전이 앱 폴더의 `apo\` · `config\` 에 둔 백업은 값을 검증한 뒤 옮김).
설치 프로그램이 `C:\Program Files\VoiceChanger\apo\VoiceChangerAPO.dll` 을 각 마이크의 처리 단계에 붙입니다 (`scripts\mic-apo.ps1`, 바꾼 값의 원래 값은 같은 곳의 `apo\mic-apo-backup.json`, v1.0.1 까지 고른 폴더의 `apo\` 에 있던 백업은 설치 프로그램이 이 자리로 옮기고 mic-apo.ps1 이 값을 검증).
통화 앱(디스코드 등)이 여는 통화(Communications) 모드 스트림에도 붙도록 기본 · 통화 · 음성 · 미디어 모드로 등록합니다. 드라이버가 이미 모드 목록을 갖고 있으면 그 목록을 그대로 둡니다.
- 변환기가 꺼져 있으면 아무것도 하지 않습니다. 원래 목소리가 그대로 나갑니다

View File

@@ -1,31 +1,30 @@
; 음성 변환기 설치 프로그램 (Inno Setup 6). 빌드: scripts/build-release.sh 가 만든 dist\payload 를 담는다.
; ISCC.exe installer\VoiceChanger.iss → dist\VoiceChangerSetup.exe
; 하는 일
; 1. 설치할 폴더를 고르게 한다. Python · 엔진 · 모델 · 설정 · 캐시 · 임시 파일이 모두 그 폴더 안에만 생긴다
; (바탕 화면처럼 일반 사용자 폴더 아래도 됨)
; 2. 그 폴더에 앱 파일을 풀고, 마이크마다 변환 모듈(APO)을 붙인다 (가상 오디오 장치 설치 없음).
; 관리자 권한 · 오디오 서비스가 실행하는 부분(APO · mic-apo.ps1 · 제거 프로그램)은 고른 폴더가 아니라
; Program Files\VoiceChanger 에 둔다. 고른 폴더의 상위가 사용자 소유면 그 사용자가 폴더를 통째로 바꿔칠 수 있기 때문
; 3. Python · 엔진 · torch(CUDA) · 엔진 기본 모델을 그 폴더 안으로 내려받는다 (scripts\install.ps1, 10~20분)
; 제거할 때는 마이크 설정을 원래대로 되돌리고, 모델 · 녹음까지 지울지 묻는다.
; 1. 설치할 폴더를 고르게 한다 (바탕 화면 · 문서 아래도 됨). 앱 · Python · 엔진 · 모델 · 설정 · 캐시가 모두 그 폴더에 생긴다.
; 2. 관리자 권한 · 오디오 서비스가 실행하는 부분(마이크 모듈 APO · mic-apo.ps1 · 제거 프로그램)은
; Program Files\VoiceChanger({app})에 두고, 마이크마다 APO 를 붙인다 (가상 오디오 장치 설치 없음).
; 3. 고른 폴더는 관리자 권한으로 건드리지 않는다. 앱 파일 복사와 Python · 엔진 · 기본 모델 내려받기는
; 설치를 시작한 사용자 권한으로 한다 (scripts\deploy.ps1 → install.ps1, 10~20분).
; 고른 폴더의 상위가 사용자 소유면 설치 중에 그 폴더를 다른 곳을 가리키는 정션으로 바꿔칠 수 있어서,
; 관리자 권한으로 그 경로에 쓰거나 권한을 바꾸면 엉뚱한 곳이 바뀔 수 있기 때문이다.
; 제거할 때는 마이크 설정을 원래대로 되돌리고 Program Files 쪽을 지운다. 고른 폴더는 남긴다 (사용자가 직접 지울 수 있음).
#define AppName "음성 변환기"
#ifndef AppVersion
#define AppVersion "1.0.0"
#endif
; 관리자 권한 · 오디오 서비스(audiodg)가 실행하는 부분. Program Files 아래라 관리자만 고칠 수 있다
#define SysDir "{commonpf}\VoiceChanger"
[Setup]
AppId={{8C3F2A51-6D0B-4E7A-9F3C-2B5E1D7A4C90}
AppName={#AppName}
AppVersion={#AppVersion}
AppPublisher=voice_copy
DefaultDirName={sd}\VoiceChanger
DisableDirPage=no
; {app} 은 항상 Program Files\VoiceChanger. 사용자가 고르는 폴더는 아래 [Code] 의 DataPage
DefaultDirName={commonpf}\VoiceChanger
DisableDirPage=yes
UsePreviousAppDir=no
DisableProgramGroupPage=yes
DirExistsWarning=no
AllowUNCPath=no
PrivilegesRequired=admin
ArchitecturesAllowed=x64compatible
ArchitecturesInstallIn64BitMode=x64compatible
@@ -35,55 +34,95 @@ OutputBaseFilename=VoiceChangerSetup
Compression=lzma2
SolidCompression=yes
WizardStyle=modern
UninstallFilesDir={#SysDir}\uninstall
UninstallDisplayIcon={app}\VoiceChanger.exe
UninstallFilesDir={app}\uninstall
UninstallDisplayIcon={app}\payload\VoiceChanger.exe
UninstallDisplayName={#AppName}
[Languages]
Name: "ko"; MessagesFile: "compiler:Languages\Korean.isl"
[Messages]
ko.SelectDirLabel3=음성 변환기를 설치할 폴더를 골라 주세요.%n%nPython · 변환 엔진 · 목소리 모델 · 설정 · 학습 파일 · 캐시가 모두 이 폴더 안에만 저장됩니다. 설치 중에 약 8GB 를 내려받고, 모델을 만들면 더 늘어나므로 15GB 이상 여유가 있는 드라이브를 골라 주세요.
ko.DiskSpaceMBLabel=설치 중에 약 8GB 를 더 내려받습니다. 15GB 이상 비어 있는 드라이브를 권합니다.
[Tasks]
Name: "desktopicon"; Description: "바탕 화면에 바로 가기 만들기"; Flags: unchecked
[Files]
Source: "secure-dir.ps1"; Flags: dontcopy
Source: "..\dist\payload\*"; DestDir: "{app}"; Excludes: "\apo,\apo\*,\scripts\mic-apo.ps1"; Flags: recursesubdirs createallsubdirs ignoreversion
Source: "..\dist\payload\apo\*"; DestDir: "{#SysDir}\apo"; Flags: ignoreversion
Source: "..\dist\payload\scripts\mic-apo.ps1"; DestDir: "{#SysDir}\scripts"; Flags: ignoreversion
Source: "legacy.ps1"; Flags: dontcopy
Source: "deploy.ps1"; DestDir: "{app}\scripts"; Flags: ignoreversion
Source: "..\dist\payload\apo\*"; DestDir: "{app}\apo"; Flags: ignoreversion
Source: "..\dist\payload\scripts\mic-apo.ps1"; DestDir: "{app}\scripts"; Flags: ignoreversion
; 고른 폴더에 사용자 권한으로 복사할 앱 파일
Source: "..\dist\payload\*"; DestDir: "{app}\payload"; Excludes: "\apo,\apo\*,\scripts\mic-apo.ps1"; Flags: recursesubdirs createallsubdirs ignoreversion
[Icons]
Name: "{autoprograms}\{#AppName}"; Filename: "{app}\VoiceChanger.exe"; WorkingDir: "{app}"
Name: "{autodesktop}\{#AppName}"; Filename: "{app}\VoiceChanger.exe"; WorkingDir: "{app}"; Tasks: desktopicon
; 바로 가기는 앱을 복사한 뒤 [Code] 에서 만든다 ([Icons] 는 대상 파일이 아직 없을 때 만들어져 대상이 빈 바로 가기가 됨)
[UninstallDelete]
Type: files; Name: "{autoprograms}\{#AppName}.lnk"
Type: files; Name: "{autodesktop}\{#AppName}.lnk"
[Run]
Filename: "{app}\VoiceChanger.exe"; Description: "음성 변환기 실행"; Flags: postinstall nowait skipifsilent unchecked
Filename: "{code:DataDir}\VoiceChanger.exe"; Description: "음성 변환기 실행"; Flags: postinstall nowait skipifsilent unchecked runasoriginaluser
[UninstallRun]
Filename: "powershell.exe"; Parameters: "-NoProfile -ExecutionPolicy Bypass -File ""{#SysDir}\scripts\mic-apo.ps1"" -Uninstall -Root ""{#SysDir}"""; Flags: runhidden waituntilterminated; RunOnceId: "MicApoUninstall"
Filename: "powershell.exe"; Parameters: "-NoProfile -ExecutionPolicy Bypass -File ""{app}\scripts\mic-apo.ps1"" -Uninstall -Root ""{app}"""; Flags: runhidden waituntilterminated; RunOnceId: "MicApoUninstall"
[Code]
{ 설치 폴더 보안은 secure-dir.ps1 (설치 프로그램에 들어 있고 임시 폴더에 풀어서 관리자 권한으로 실행)이 맡는다.
설치 폴더의 실행 파일 · app\ · scripts\ 는 관리자만 고칠 수 있고,
일반 사용자는 데이터 폴더(models · training · datasets · config · cache · env · engine · tools)에만 쓴다.
관리자 권한으로 실행되는 APO · mic-apo.ps1 · 제거 프로그램은 Program Files 쪽(SysDir)에 있다. }
function SecureDir(const Mode, Dir, Extra: String): Integer;
const
UninstKey = 'SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{8C3F2A51-6D0B-4E7A-9F3C-2B5E1D7A4C90}_is1';
var
DataPage: TInputDirWizardPage;
LegacyOld: String;
UninstDataDir: String;
{ Program Files\VoiceChanger. 설치 폴더 상수와 같지만 그 상수는 InitializeWizard 때 아직 정해지지 않아서 따로 둔다 }
function SysDir: String;
begin
ExtractTemporaryFile('secure-dir.ps1');
if not Exec(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'),
'-NoProfile -ExecutionPolicy Bypass -File "' + ExpandConstant('{tmp}\secure-dir.ps1') + '" -Mode ' + Mode + ' -App "' + Dir + '"' + Extra,
'', SW_HIDE, ewWaitUntilTerminated, Result) then
Result := -1;
Log('secure-dir ' + Mode + ' exit=' + IntToStr(Result));
Result := ExpandConstant('{commonpf}\VoiceChanger');
end;
function PowerShell(const Args: String; const Show: Integer; var Code: Integer): Boolean;
function DataDir(Param: String): String;
begin
Result := Exec(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'),
'-NoProfile -ExecutionPolicy Bypass ' + Args, ExpandConstant('{app}'), Show, ewWaitUntilTerminated, Code);
Result := RemoveBackslashUnlessRoot(DataPage.Values[0]);
end;
{ 명령줄 인자로 넘길 경로. "D:\" 처럼 \ 로 끝나면 닫는 따옴표가 이스케이프되므로 "D:\." 로 }
function ArgPath(const S: String): String;
begin
Result := S;
if Copy(Result, Length(Result), 1) = '\' then
Result := Result + '.';
end;
function PowerShellExe: String;
begin
Result := ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe');
end;
procedure InitializeWizard;
var
Def, Prev: String;
begin
DataPage := CreateInputDirPage(wpSelectDir, '설치할 폴더', '음성 변환기를 어디에 설치할까요?',
'앱 · Python · 변환 엔진 · 목소리 모델 · 설정 · 학습 파일 · 캐시가 모두 이 폴더에 저장됩니다. ' +
'바탕 화면이나 문서 아래도 됩니다. 설치 중에 약 8GB 를 내려받고, 모델을 만들면 더 늘어나므로 15GB 이상 여유가 있는 드라이브를 골라 주세요.',
False, 'VoiceChanger');
DataPage.Add('');
{ 기본값: /DATADIR=, 지난 설치에서 고른 폴더, v1.0.2 까지의 설치 폴더(제거 정보의 App Path), C:\VoiceChanger }
Def := ExpandConstant('{param:DATADIR|}');
if Def = '' then
Def := GetPreviousData('DataDir', '');
if (Def = '') and RegQueryStringValue(HKLM, UninstKey, 'Inno Setup: App Path', Prev) and
(CompareText(RemoveBackslashUnlessRoot(Prev), SysDir) <> 0) then
Def := Prev;
if Def = '' then
Def := ExpandConstant('{sd}\VoiceChanger');
DataPage.Values[0] := Def;
end;
procedure RegisterPreviousData(PreviousDataKey: Integer);
begin
SetPreviousData(PreviousDataKey, 'DataDir', DataDir(''));
end;
function IsEmptyDir(const Dir: String): Boolean;
@@ -105,23 +144,9 @@ begin
end;
end;
{ 이 앱을 이미 설치한 폴더인지. v1.0.1 까지는 제거 프로그램이 설치 폴더 안(uninstall\)에 있었고,
지금은 Program Files 쪽에 있으므로 이전 설치 위치(관리자만 쓰는 제거 정보 레지스트리, PrevAppDir)와도 비교한다. }
function IsOurInstall(const Dir: String): Boolean;
function IsUnder(const Child, Parent: String): Boolean;
begin
Result := FileExists(AddBackslash(Dir) + 'uninstall\unins000.exe') or
((WizardForm.PrevAppDir <> '') and DirExists(Dir) and
(CompareText(RemoveBackslashUnlessRoot(WizardForm.PrevAppDir), RemoveBackslashUnlessRoot(Dir)) = 0));
end;
{ 마이크 백업을 옮겨 올 이전 설치 폴더. 명령줄에서 "D:\" 처럼 \ 로 끝나면 닫는 따옴표가 이스케이프되므로 "D:\." 로 }
function PrevRoot: String;
begin
Result := RemoveBackslashUnlessRoot(WizardForm.PrevAppDir);
if Result = '' then
Result := RemoveBackslashUnlessRoot(ExpandConstant('{app}'));
if Copy(Result, Length(Result), 1) = '\' then
Result := Result + '.';
Result := Pos(Lowercase(AddBackslash(Parent)), Lowercase(AddBackslash(Child))) = 1;
end;
{ OneDrive 로 동기화되는 폴더(바탕 화면이 OneDrive 로 옮겨진 PC 가 많음)인지 }
@@ -139,7 +164,7 @@ begin
else
OD := GetEnv('OneDriveCommercial');
end;
if (OD <> '') and (Pos(Lowercase(AddBackslash(OD)), Lowercase(AddBackslash(Dir))) = 1) then
if (OD <> '') and IsUnder(Dir, OD) then
begin
Result := True;
Exit;
@@ -147,124 +172,140 @@ begin
end;
end;
{ 다른 파일이 들어 있는 폴더에는 설치하지 않는다. 설치 폴더의 권한을 잠그고, 제거할 때 지우기 때문.
이 앱을 이미 설치한 폴더(업데이트)나 비어 있는 · 새 폴더만 받는다. }
{ 고른 폴더 확인 (읽기만 함). 문제가 있으면 안내 문구 }
function CheckDataDir(const Dir: String): String;
begin
Result := '';
if (Length(Dir) < 3) or (Copy(Dir, 2, 2) <> ':\') then
Result := '드라이브 문자로 시작하는 폴더를 골라 주세요. (예: C:\VoiceChanger)'
else if IsUnder(Dir, SysDir) or IsUnder(SysDir, Dir) then
Result := SysDir + ' 은 설치 프로그램이 쓰는 곳입니다. 다른 폴더를 골라 주세요.'
{ 다른 파일이 든 폴더에는 설치하지 않는다 (예: 바탕 화면 자체). 이 앱이 이미 설치된 폴더(업데이트)는 된다 }
else if DirExists(Dir) and not IsEmptyDir(Dir) and not FileExists(AddBackslash(Dir) + 'VoiceChanger.exe') then
Result := '이 폴더에는 이미 다른 파일이 있습니다. 비어 있는 폴더나 새 폴더를 골라 주세요. (예: ' + AddBackslash(Dir) + 'VoiceChanger)';
end;
function NextButtonClick(CurPageID: Integer): Boolean;
var
Dir: String;
Msg: String;
begin
Result := True;
if CurPageID <> wpSelectDir then Exit;
Dir := WizardDirValue;
if DirExists(Dir) and not IsEmptyDir(Dir) and not IsOurInstall(Dir) then
if CurPageID <> DataPage.ID then Exit;
Msg := CheckDataDir(DataDir(''));
if Msg <> '' then
begin
SuppressibleMsgBox('이 폴더에는 이미 다른 파일이 있습니다.' + #13#10 +
'비어 있는 폴더나 새 폴더를 골라 주세요. (예: ' + AddBackslash(Dir) + 'VoiceChanger)', mbError, MB_OK, IDOK);
SuppressibleMsgBox(Msg, mbError, MB_OK, IDOK);
Result := False;
Exit;
end;
if InOneDrive(Dir) and (SuppressibleMsgBox('이 폴더는 OneDrive 로 동기화됩니다.' + #13#10 +
if InOneDrive(DataDir('')) and (SuppressibleMsgBox('이 폴더는 OneDrive 로 동기화됩니다.' + #13#10 +
'설치하면서 받는 8GB 이상(Python · 엔진 · 모델)이 OneDrive 에 올라가고, OneDrive 가 공간 확보로 파일을 내리면 음성 변환기가 실행되지 않을 수 있습니다.' + #13#10#13#10 +
'그래도 여기에 설치할까요? ("아니요" 를 누르고 C:\VoiceChanger 처럼 OneDrive 밖의 폴더를 고르는 것을 권합니다)',
mbConfirmation, MB_YESNO, IDYES) <> IDYES) then
Result := False;
end;
procedure StartAudio;
var
Code: Integer;
begin
Exec(PowerShellExe, '-NoProfile -Command "Start-Service Audiosrv"', '', SW_HIDE, ewWaitUntilTerminated, Code);
end;
function PrepareToInstall(var NeedsRestart: Boolean): String;
var
Code: Integer;
ApoInUse: Boolean;
Extra: String;
begin
Result := '';
Result := CheckDataDir(DataDir('')); { 조용한 설치(/DATADIR=)에서도 확인 }
if Result <> '' then Exit;
{ 다시 설치(업데이트)할 때 오디오 엔진이 쥐고 있는 APO 파일을 바꿀 수 있게 잠깐 오디오 서비스를 멈춘다.
설치 뒤 mic-apo.ps1 이 다시 켠다. }
{ 이전 버전(v1.0.1 까지)은 APO 를 설치 폴더의 apo\ 에 두었다. secure-dir 이 그 파일을 지운다. }
ApoInUse := FileExists(ExpandConstant('{#SysDir}\apo\VoiceChangerAPO.dll')) or FileExists(ExpandConstant('{app}\apo\VoiceChangerAPO.dll'));
v1.0.1 까지는 APO 가 고른 폴더의 apo\ 에 있었다 (legacy.ps1 이 지움). 설치 뒤 mic-apo.ps1 이 다시 켠다. }
ApoInUse := FileExists(ExpandConstant('{app}\apo\VoiceChangerAPO.dll')) or FileExists(DataDir('') + '\apo\VoiceChangerAPO.dll');
if ApoInUse then
Exec(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'),
'-NoProfile -Command "Stop-Service -Name AudioEndpointBuilder -Force"', '', SW_HIDE, ewWaitUntilTerminated, Code);
if IsOurInstall(ExpandConstant('{app}')) then
Extra := ' -Upgrade'
Exec(PowerShellExe, '-NoProfile -Command "Stop-Service -Name AudioEndpointBuilder -Force"', '', SW_HIDE, ewWaitUntilTerminated, Code);
{ v1.0.0 · v1.0.1 이 관리자 소유로 잠가 둔 폴더면, 그 실행 부분을 지우고 <폴더>.old 로 비켜 둔다 (관리자 권한).
상위 폴더가 관리자 소유라 일반 사용자가 바꿔칠 수 없을 때만 legacy.ps1 이 한다. }
LegacyOld := DataDir('') + '.old';
ExtractTemporaryFile('legacy.ps1');
if not Exec(PowerShellExe, '-NoProfile -ExecutionPolicy Bypass -File "' + ExpandConstant('{tmp}\legacy.ps1') +
'" -App "' + ArgPath(DataDir('')) + '" -Sys "' + ExpandConstant('{app}') + '" -Old "' + LegacyOld + '"',
'', SW_HIDE, ewWaitUntilTerminated, Code) then
Code := -1;
Log('legacy exit=' + IntToStr(Code));
case Code of
0: LegacyOld := '';
1: ;
20: Result := '이 폴더에 있는 이전 버전을 안전하게 옮길 수 없습니다. 새 폴더를 골라 주세요.';
22: Result := LegacyOld + ' 폴더가 이미 있습니다. 그 폴더를 지우거나 다른 폴더를 골라 주세요.';
else
Extra := '';
{ 파일을 풀기 전에 설치 폴더를 관리자 소유로 잠근다. 실패하면 설치하지 않는다. }
case SecureDir('Prepare', ExpandConstant('{app}'), Extra) of
0: ;
10: Result := '이 폴더에는 이미 다른 파일이 있습니다. 비어 있는 폴더나 새 폴더를 골라 주세요.';
11: Result := '설치 폴더 안에 링크(정션 · 심볼릭 링크)가 있어 안전하게 설치할 수 없습니다. 링크를 지우거나 새 폴더를 골라 주세요.';
else
Result := '설치 폴더의 권한을 잠그지 못했습니다. 다른 폴더를 골라 다시 설치해 주세요.';
Result := '이전 버전 폴더를 정리하지 못했습니다 (코드 ' + IntToStr(Code) + '). 다른 폴더를 골라 다시 설치해 주세요.';
end;
if (Result <> '') and ApoInUse then
Exec(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'), '-NoProfile -Command "Start-Service Audiosrv"', '', SW_HIDE, ewWaitUntilTerminated, Code);
StartAudio;
end;
procedure CurStepChanged(CurStep: TSetupStep);
var
Code: Integer;
Args: String;
begin
if CurStep <> ssPostInstall then Exit;
{ 데이터 폴더에만 사용자 쓰기 권한을 주고, 관리자 권한으로 실행되는 파일이 잠겼는지 확인한다.
확인이 안 되면 관리자 권한으로 아무것도 실행하지 않는다. }
if SecureDir('Finish', ExpandConstant('{app}'), '') <> 0 then
begin
Exec(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'), '-NoProfile -Command "Start-Service Audiosrv"', '', SW_HIDE, ewWaitUntilTerminated, Code);
SuppressibleMsgBox('설치 폴더의 권한을 확인하지 못해 마이크 연결과 엔진 내려받기를 하지 않았습니다.' + #13#10 +
'음성 변환기를 제거한 뒤 다른 폴더(예: C:\VoiceChanger)에 다시 설치해 주세요.', mbError, MB_OK, IDOK);
Exit;
end;
WizardForm.StatusLabel.Caption := '마이크에 변환 모듈을 붙이는 중... (윈도우 소리가 잠깐 끊깁니다)';
if not PowerShell('-File "' + ExpandConstant('{#SysDir}\scripts\mic-apo.ps1') + '" -Install -Root "' + ExpandConstant('{#SysDir}') +
'" -From "' + PrevRoot + '"', SW_HIDE, Code) or (Code <> 0) then
if not Exec(PowerShellExe, '-NoProfile -ExecutionPolicy Bypass -File "' + ExpandConstant('{app}\scripts\mic-apo.ps1') +
'" -Install -Root "' + ExpandConstant('{app}') + '"', ExpandConstant('{app}'), SW_HIDE, ewWaitUntilTerminated, Code) or (Code <> 0) then
begin
Exec(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'), '-NoProfile -Command "Start-Service Audiosrv"', '', SW_HIDE, ewWaitUntilTerminated, Code);
StartAudio;
SuppressibleMsgBox('마이크에 변환 모듈을 붙이지 못했습니다. 설치가 끝난 뒤 음성 변환기의 "마이크 다시 연결" 을 눌러 주세요.', mbError, MB_OK, IDOK);
end;
WizardForm.StatusLabel.Caption := 'Python · 변환 엔진 · 기본 모델을 설치 폴더로 내려받는 중... (10~20분, 검은 창에 진행 상황이 나옵니다)';
{ 일반 권한(설치를 시작한 사용자)으로 받는다. 관리자 권한으로 사용자 쓰기 폴더(env · engine)의 코드를 돌리지 않게. }
if not ExecAsOriginalUser(ExpandConstant('{sys}\WindowsPowerShell\v1.0\powershell.exe'),
'-NoProfile -ExecutionPolicy Bypass -File "' + ExpandConstant('{app}\scripts\install.ps1') + '"',
ExpandConstant('{app}'), SW_SHOWNORMAL, ewWaitUntilTerminated, Code) or (Code <> 0) then
WizardForm.StatusLabel.Caption := '앱을 복사하고 Python · 변환 엔진 · 기본 모델을 내려받는 중... (10~20분, 검은 창에 진행 상황이 나옵니다)';
{ 설치를 시작한 사용자 권한으로: 고른 폴더에 앱 파일 복사 → 이전 버전의 데이터 폴더 옮기기 → install.ps1 }
Args := '-NoProfile -ExecutionPolicy Bypass -File "' + ExpandConstant('{app}\scripts\deploy.ps1') + '" -Data "' + ArgPath(DataDir('')) + '"';
if LegacyOld <> '' then
Args := Args + ' -From "' + LegacyOld + '"';
if not ExecAsOriginalUser(PowerShellExe, Args, ExpandConstant('{app}'), SW_SHOWNORMAL, ewWaitUntilTerminated, Code) then
Code := -1;
Log('deploy exit=' + IntToStr(Code));
case Code of
0: ;
31: SuppressibleMsgBox(DataDir('') + ' 이 다른 곳을 가리키는 링크(정션)라서 앱을 복사하지 않았습니다.' + #13#10 +
'링크를 지우거나 다른 폴더를 골라 다시 설치해 주세요.', mbError, MB_OK, IDOK);
32: SuppressibleMsgBox(DataDir('') + ' 에 앱 파일을 복사하지 못했습니다 (쓰기 권한이 없는 폴더일 수 있습니다).' + #13#10 +
'내 계정으로 쓸 수 있는 폴더(예: C:\VoiceChanger, 바탕 화면)를 골라 다시 설치해 주세요.', mbError, MB_OK, IDOK);
else
SuppressibleMsgBox('엔진을 내려받지 못했습니다 (인터넷 연결을 확인해 주세요).' + #13#10 +
'설치 폴더의 install.bat 을 실행하면 받은 곳부터 이어서 받습니다.', mbError, MB_OK, IDOK);
DataDir('') + '\install.bat 을 실행하면 받은 곳부터 이어서 받습니다.', mbError, MB_OK, IDOK);
end;
if FileExists(DataDir('') + '\VoiceChanger.exe') then
begin
CreateShellLink(ExpandConstant('{autoprograms}\{#AppName}.lnk'), '{#AppName}', DataDir('') + '\VoiceChanger.exe', '', DataDir(''), '', 0, SW_SHOWNORMAL);
if WizardIsTaskSelected('desktopicon') then
CreateShellLink(ExpandConstant('{autodesktop}\{#AppName}.lnk'), '{#AppName}', DataDir('') + '\VoiceChanger.exe', '', DataDir(''), '', 0, SW_SHOWNORMAL);
end;
{ legacy.ps1 이 비켜 둔 이전 버전 폴더: 데이터 폴더를 다 옮겼으면 비어 있다 (상위가 관리자 소유라 이 경로는 안전) }
if (LegacyOld <> '') and DirExists(LegacyOld) and not RemoveDir(LegacyOld) then
SuppressibleMsgBox('이전 버전 폴더 ' + LegacyOld + ' 에 옮기지 못한 파일이 남아 있습니다. 확인한 뒤 지워 주세요.', mbInformation, MB_OK, IDOK);
end;
procedure CurUninstallStepChanged(CurUninstallStep: TUninstallStep);
var
App: String;
begin
if CurUninstallStep = usUninstall then
begin
if not RegQueryStringValue(HKLM, UninstKey, 'Inno Setup CodeFile: DataDir', UninstDataDir) then
UninstDataDir := '';
Exit;
end;
{ 마이크 되돌리기([UninstallRun])와 설치 파일 지우기가 끝난 뒤 }
if CurUninstallStep <> usPostUninstall then Exit;
App := ExpandConstant('{app}');
{ 설치 중에 내려받은 것들 (설치 파일 목록에 없어서 직접 지운다) }
DelTree(App + '\env', True, True, True);
DelTree(App + '\engine', True, True, True);
DelTree(App + '\tools', True, True, True);
DelTree(App + '\cache', True, True, True);
DelTree(App + '\app\__pycache__', True, True, True);
RemoveDir(App + '\app');
{ 사용자가 만든 것은 물어보고 지운다. 조용히 제거할 때는 남겨 둔다 }
{ 앱이 만든 폴더만 지운다. 설치 폴더 자체는 비어 있을 때만 지운다 (RemoveDir 는 빈 폴더만 지움) }
if (not UninstallSilent) and (MsgBox('만든 목소리 모델 · 학습 파일 · 녹음 · 설정도 지울까요?' + #13#10 +
'(models, training, datasets, config 폴더)' + #13#10#13#10 + '"아니요" 를 누르면 남겨 둡니다.', mbConfirmation, MB_YESNO) = IDYES) then
begin
DelTree(App + '\models', True, True, True);
DelTree(App + '\training', True, True, True);
DelTree(App + '\datasets', True, True, True);
DelTree(App + '\config', True, True, True);
end;
RemoveDir(App + '\models');
RemoveDir(App + '\training');
RemoveDir(App + '\datasets');
RemoveDir(App + '\config');
RemoveDir(App + '\apo');
RemoveDir(App);
{ Program Files 쪽: mic-apo.ps1 이 남긴 기록 }
DeleteFile(ExpandConstant('{#SysDir}\apo\mic-apo.log'));
RemoveDir(ExpandConstant('{#SysDir}\apo'));
RemoveDir(ExpandConstant('{#SysDir}\scripts'));
RemoveDir(ExpandConstant('{#SysDir}'));
DeleteFile(ExpandConstant('{app}\apo\mic-apo.log'));
RemoveDir(ExpandConstant('{app}\apo'));
RemoveDir(ExpandConstant('{app}\scripts'));
RemoveDir(ExpandConstant('{app}'));
{ 고른 폴더는 관리자 권한으로 지우지 않는다 (정션으로 바꿔쳐 다른 곳을 지우게 만들 수 있음). 내 계정 폴더라 직접 지울 수 있다 }
if (UninstDataDir <> '') and DirExists(UninstDataDir) and not UninstallSilent then
MsgBox('마이크 설정을 되돌리고 프로그램을 지웠습니다.' + #13#10#13#10 +
'앱 · Python · 엔진 · 목소리 모델 · 녹음 · 설정이 든 폴더는 남겨 두었습니다:' + #13#10 + UninstDataDir + #13#10#13#10 +
'필요 없으면 이 폴더를 직접 지워 주세요.', mbInformation, MB_OK);
end;

View File

@@ -0,0 +1,51 @@
# 고른 폴더에 앱을 설치한다. 설치 프로그램이 "설치를 시작한 사용자" 권한으로 실행한다 (ExecAsOriginalUser).
# 고른 폴더(바탕 화면 등)는 상위가 사용자 소유일 수 있어서 관리자 권한으로는 건드리지 않는다:
# 관리자 권한으로 경로를 다루는 도중에 폴더를 정션으로 바꿔치면 엉뚱한 곳에 쓰거나 권한을 바꾸게 되기 때문.
# deploy.ps1 -Data <고른 폴더> [-From <이전 버전 폴더>]
# 1. 이전 버전 폴더에서 데이터 폴더(models · config · env 등)를 옮겨 온다
# - v1.0.0 · v1.0.1: 설치 프로그램(legacy.ps1)이 <폴더>.old 로 비켜 두고 -From 으로 알려 줌
# - v1.0.2: 고른 폴더가 관리자 소유로 잠겨 있으면, 상위 폴더가 내 것일 때 이름을 바꿔 비켜 두고 새로 만든다
# 2. Program Files\VoiceChanger\payload 의 앱 파일을 복사한다
# 3. scripts\install.ps1 로 Python · 엔진 · 기본 모델을 받는다
# 종료 코드: 0 성공, 31 고른 폴더가 링크(정션), 32 폴더를 만들거나 복사하지 못함, 그 밖 = install.ps1 실패
param([Parameter(Mandatory)][string]$Data, [string]$From)
$ErrorActionPreference = 'Stop'
[Console]::OutputEncoding = [Text.Encoding]::UTF8
$Payload = Join-Path (Split-Path -Parent $PSScriptRoot) 'payload'
$DataDirs = 'models', 'training', 'datasets', 'config', 'cache', 'env', 'engine', 'tools'
$Data = [IO.Path]::GetFullPath($Data).TrimEnd('\')
function Say($m) { Write-Host "[deploy] $m" }
function Is-Link([string]$p) { ([IO.File]::GetAttributes($p) -band [IO.FileAttributes]::ReparsePoint) -ne 0 }
function Can-Write([string]$d) {
$t = Join-Path $d ".vc-write-test-$PID"
try { [IO.File]::WriteAllText($t, ''); Remove-Item -LiteralPath $t -Force; return $true } catch { return $false }
}
try {
if (Test-Path -LiteralPath $Data) {
if (Is-Link $Data) { Say "고른 폴더가 링크(정션)입니다: $Data"; exit 31 }
if (-not (Can-Write $Data)) {
$old = "$Data.old-$(Get-Date -Format yyyyMMddHHmmss)"
Rename-Item -LiteralPath $Data -NewName (Split-Path -Leaf $old)
Say "이전 버전 폴더를 비켜 둠: $old"
$From = $old
}
}
New-Item -ItemType Directory -Force -Path $Data | Out-Null
if ($From -and (Test-Path -LiteralPath $From)) {
foreach ($d in $DataDirs) {
$s = Join-Path $From $d
$t = Join-Path $Data $d
if ((Test-Path -LiteralPath $s) -and -not (Test-Path -LiteralPath $t)) { Move-Item -LiteralPath $s -Destination $t; Say "옮김: $d" }
}
}
} catch {
Say "실패: $($_.Exception.Message)"
exit 32
}
& robocopy $Payload $Data /E /R:1 /W:1 /NFL /NDL /NJH /NJS /NP | Out-Host
if ($LASTEXITCODE -ge 8) { Say "앱 파일을 복사하지 못함 (robocopy $LASTEXITCODE)"; exit 32 }
$global:LASTEXITCODE = 0
& (Join-Path $Data 'scripts\install.ps1')
exit $LASTEXITCODE

View File

@@ -0,0 +1,84 @@
# v1.0.0 · v1.0.1 이 설치한 폴더 정리 (설치 프로그램이 관리자 권한으로 {tmp} 에서 실행).
# 그 버전은 고른 폴더를 관리자 소유로 잠그고 그 안에 실행 파일 · 제거 프로그램 · 마이크 모듈을 두었다.
# 이제 앱 파일은 사용자 권한으로 복사하므로(deploy.ps1), 관리자 권한으로 하는 일은 이것뿐이다:
# 이전 실행 부분을 이름을 지정해 지우고, 마이크 백업을 Program Files 쪽으로 옮기고, 폴더 이름을 -Old 로 바꾼다.
# 남은 데이터 폴더(models · config · env 등, 일반 사용자가 쓸 수 있음)는 deploy.ps1 이 사용자 권한으로 새 폴더에 옮긴다.
# 관리자가 아닌 누구도 이 폴더나 그 위 폴더를 지우거나 이름을 바꿀 수 없을 때만 한다 (소유자 · ACL 로 확인).
# 그래야 일반 사용자가 이 작업 도중에 경로를 다른 곳을 가리키는 정션으로 바꿔칠 수 없다. ACL 은 관리자만 바꿀 수 있어서
# 확인한 뒤에도 그대로다. v1.0.0 · v1.0.1 은 상위가 관리자 소유인 곳에만 설치했고 폴더를 이렇게 잠갔다.
# -App <고른 폴더> -Sys <Program Files\VoiceChanger> -Old <새 이름 전체 경로>
# 종료 코드: 0 = 이전 버전 폴더 아님(할 일 없음), 1 = 정리하고 -Old 로 옮김,
# 20 = 이전 버전 폴더지만 안전하게 다룰 수 없음, 22 = -Old 가 이미 있음, 12 = 실패
param([Parameter(Mandatory)][string]$App, [Parameter(Mandatory)][string]$Sys, [Parameter(Mandatory)][string]$Old)
$ErrorActionPreference = 'Stop'
$SY = 'S-1-5-18'; $BA = 'S-1-5-32-544'
$TI = 'S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464'
$Sid = [System.Security.Principal.SecurityIdentifier]
$App = [IO.Path]::GetFullPath($App).TrimEnd('\')
function Say($m) { Write-Host "[legacy] $m" }
function Is-Link([string]$p) { ([IO.File]::GetAttributes($p) -band [IO.FileAttributes]::ReparsePoint) -ne 0 }
function Owner-Sid([string]$p) { (Get-Acl -LiteralPath $p).GetOwner($Sid).Value }
# 관리자가 아닌 사람이 $p 를 지우거나 이름을 바꿀 수 있는지: 소유자가 관리자가 아니거나,
# $p 에 DELETE · WRITE_DAC · WRITE_OWNER · GENERIC_ALL, 또는 상위 폴더에 DELETE_CHILD · WRITE_DAC · WRITE_OWNER · GENERIC_ALL 을 주는 항목이 있으면 그렇다
$Admins = @($SY, $BA, $TI)
function Grants([string]$p, [int]$bits) {
$acl = Get-Acl -LiteralPath $p
@($acl.GetAccessRules($true, $true, $Sid) | Where-Object { $_.AccessControlType -eq 'Allow' -and
($_.PropagationFlags -band [System.Security.AccessControl.PropagationFlags]::InheritOnly) -eq 0 -and
$_.IdentityReference.Value -notin $Admins -and ([int]$_.FileSystemRights -band $bits) }).Count -gt 0
}
function Swappable([string]$p) {
$parent = Split-Path -Parent $p
if (-not $parent) { return $false } # 드라이브 루트는 지우거나 이름을 바꿀 수 없음
if ((Owner-Sid $p) -notin $Admins) { return $true }
if (Grants $p (0x10000 -bor 0x40000 -bor 0x80000 -bor 0x10000000)) { return $true }
if (Grants $parent (0x40 -bor 0x40000 -bor 0x80000 -bor 0x10000000)) { return $true }
return $false
}
try {
if (-not (Test-Path -LiteralPath (Join-Path $App 'uninstall\unins000.exe'))) { exit 0 }
$p = $App
while ($p) {
if ((Is-Link $p) -or (Swappable $p)) { Say "안전하게 다룰 수 없음: $p (link=$(Is-Link $p) owner=$(Owner-Sid $p))"; exit 20 }
$p = Split-Path -Parent $p
}
if (Test-Path -LiteralPath $Old) { Say "이미 있음: $Old"; exit 22 }
# 이전 배포의 실행 부분만 이름을 지정해 지운다. 목록에 없는 파일은 남겨 두고 폴더째 -Old 로 옮긴다.
$known = [ordered]@{
'.' = @('VoiceChanger.exe', 'install.bat', 'train.bat', 'examples.bat', 'README.md')
'scripts' = @('install.ps1', 'mic-apo.ps1')
'app' = @('common.py', 'examples.py', 'mic_bridge.py', 'models.py', 'record_servers.py', 'setup_engine.py', 'train.py', 'voice_changer.py')
'launcher' = @('launcher.c')
'apo' = @('VoiceChangerAPO.dll', 'vcapo.cpp', 'vccore.h', 'vcapo.def', 'mic-apo.json', 'mic-apo.log')
'uninstall' = @('unins*.exe', 'unins*.dat', 'unins*.msg')
'app\__pycache__' = @('*.pyc')
}
$n = 0
foreach ($d in $known.Keys) {
$dir = if ($d -eq '.') { $App } else { Join-Path $App $d }
if (-not (Test-Path -LiteralPath $dir -PathType Container)) { continue }
foreach ($pat in $known[$d]) {
Get-ChildItem -LiteralPath $dir -Force -File -Filter $pat | ForEach-Object { Remove-Item -LiteralPath $_.FullName -Force; $n++ }
}
}
# 마이크 설정 백업 (apo\ 는 관리자만 쓰던 폴더). mic-apo.ps1 이 Program Files 쪽에서 읽고 값을 다시 검증한다
$bk = Join-Path $App 'apo\mic-apo-backup.json'
$sysBk = Join-Path $Sys 'apo\mic-apo-backup.json'
if ((Test-Path -LiteralPath $bk) -and -not (Test-Path -LiteralPath $sysBk)) {
New-Item -ItemType Directory -Force -Path (Split-Path $sysBk) | Out-Null
Move-Item -LiteralPath $bk -Destination $sysBk
Say "마이크 백업을 옮김: $sysBk"
}
foreach ($d in 'app\__pycache__', 'app', 'scripts', 'launcher', 'uninstall', 'apo') { # 비었을 때만
$dir = Join-Path $App $d
if ((Test-Path -LiteralPath $dir) -and -not [IO.Directory]::EnumerateFileSystemEntries($dir).GetEnumerator().MoveNext()) { Remove-Item -LiteralPath $dir -Force }
}
Rename-Item -LiteralPath $App -NewName (Split-Path -Leaf $Old)
Say "이전 배포 파일 $n 개를 지우고 $Old 로 옮김"
exit 1
} catch {
Say "실패: $($_.Exception.Message)"
exit 12
}

View File

@@ -1,142 +0,0 @@
# 설치 폴더 보안 (설치 프로그램이 관리자 권한으로 {tmp} 에서 실행). 종료 코드로 결과를 알린다.
# (상위 폴더는 일반 사용자 소유여도 된다. 관리자 권한으로 실행되는 APO · mic-apo.ps1 · 제거 프로그램은 설치 폴더가 아니라
# Program Files\VoiceChanger 에 있어서, 사용자가 설치 폴더를 통째로 바꿔쳐도 관리자 권한을 얻지 못한다)
# -Mode Prepare -App <폴더> [-Upgrade] 파일을 풀기 전: 폴더를 만들고 소유자를 Administrators 로, 권한을 관리자 · SYSTEM 전체 +
# Users 읽기로 잠근다. 업데이트(-Upgrade 또는 v1.0.1 까지의 uninstall\ 이 있음)면 이전 버전이 사용자 쓰기 폴더에 두었던 실행 부분을 지운다.
# 10 = 다른 파일이 있는 폴더, 11 = 링크(정션 · 심볼릭 링크)가 있음, 12 = 잠그지 못함
# -Mode Finish -App <폴더> 파일을 푼 뒤: 데이터 폴더에만 Users 수정 권한을 주고, 관리자 권한으로 실행되는 파일이
# 관리자 소유이고 일반 사용자가 쓸 수 없는지 확인한다. 13 = 확인 실패
param([Parameter(Mandatory)][string]$Mode, [Parameter(Mandatory)][string]$App, [switch]$Upgrade)
$ErrorActionPreference = 'Stop'
$SY = 'S-1-5-18'; $BA = 'S-1-5-32-544'; $BU = 'S-1-5-32-545'
$TI = 'S-1-5-80-956008885-3418522649-1831038044-1853292631-2271478464'
$UserDirs = 'models', 'training', 'datasets', 'config', 'cache', 'env', 'engine', 'tools'
# 쓰기 계열 권한 비트: WriteData · AppendData · WriteEA · DeleteChild · WriteAttributes · Delete · WriteDAC · WriteOwner + GENERIC_ALL/WRITE
$WriteBits = 0x2 -bor 0x4 -bor 0x10 -bor 0x40 -bor 0x100 -bor 0x10000 -bor 0x40000 -bor 0x80000 -bor 0x10000000 -bor 0x40000000
$Sid = [System.Security.Principal.SecurityIdentifier]
$App = [IO.Path]::GetFullPath($App).TrimEnd('\')
function Say($m) { Write-Host "[secure-dir] $m" }
function Is-Link([string]$p) { ([IO.File]::GetAttributes($p) -band [IO.FileAttributes]::ReparsePoint) -ne 0 }
# 링크를 따라 들어가지 않고 폴더 안을 모두 훑어, 설치 폴더 밖을 가리키는 첫 링크를 찾는다.
# 안을 가리키는 링크는 괜찮다 (uv 가 tools\python 안에 "cpython-3.12-..." → "cpython-3.12.x-..." 정션을 만듦).
function Link-Target([string]$p) {
$t = @((Get-Item -LiteralPath $p -Force).Target) | Select-Object -First 1
if (-not $t) { return $null }
$t = [string]$t
if ($t.StartsWith('\\?\')) { $t = $t.Substring(4) }
if (-not [IO.Path]::IsPathRooted($t)) { $t = Join-Path (Split-Path -Parent $p) $t }
return [IO.Path]::GetFullPath($t)
}
function Find-Link([string]$dir) {
$stack = New-Object System.Collections.Stack
$stack.Push($dir)
while ($stack.Count) {
foreach ($e in [IO.Directory]::EnumerateFileSystemEntries($stack.Pop())) {
$a = [IO.File]::GetAttributes($e)
if ($a -band [IO.FileAttributes]::ReparsePoint) {
$t = Link-Target $e
if (-not $t -or -not ($t.StartsWith($App + '\', [StringComparison]::OrdinalIgnoreCase))) { return "$e -> $t" }
continue # 안쪽 링크: 따라 들어가지 않음 (가리키는 곳은 따로 훑음)
}
if ($a -band [IO.FileAttributes]::Directory) { $stack.Push($e) }
}
}
return $null
}
if ($Mode -eq 'Prepare') {
$upgrade = $Upgrade -or (Test-Path -LiteralPath (Join-Path $App 'uninstall\unins000.exe'))
if (Test-Path -LiteralPath $App) {
if (Is-Link $App) { Say "설치 폴더가 링크: $App"; exit 11 }
if (-not $upgrade -and [IO.Directory]::EnumerateFileSystemEntries($App).GetEnumerator().MoveNext()) { exit 10 }
$link = Find-Link $App
if ($link) { Say "링크 발견: $link"; exit 11 }
}
if ($upgrade) {
# 이전 버전(21b4278)은 설치 폴더 전체를 사용자 쓰기로 두었다. 이전 배포에 들어 있던 실행 부분은 믿지 않고
# 이름을 하나씩 지정해서만 지운다 (새 파일은 곧 다시 풂). 목록에 없는 파일(사용자가 넣어 둔 녹음 등)은 지우지 않고,
# 아래에서 소유자 · 권한만 관리자 쪽으로 정리한다. 제거 기록(unins*.dat)은 제거할 때 관리자 권한으로 쓰이므로 꼭 지운다.
$known = [ordered]@{
'.' = @('VoiceChanger.exe', 'install.bat', 'train.bat', 'examples.bat', 'README.md')
'scripts' = @('install.ps1', 'mic-apo.ps1')
'app' = @('common.py', 'examples.py', 'mic_bridge.py', 'models.py', 'record_servers.py', 'setup_engine.py', 'train.py', 'voice_changer.py')
'launcher' = @('launcher.c')
'apo' = @('VoiceChangerAPO.dll', 'vcapo.cpp', 'vccore.h', 'vcapo.def', 'mic-apo.json', 'mic-apo.log')
'uninstall' = @('unins*.exe', 'unins*.dat', 'unins*.msg')
'app\__pycache__' = @('*.pyc')
}
$n = 0
foreach ($d in $known.Keys) {
$dir = if ($d -eq '.') { $App } else { Join-Path $App $d }
if (-not (Test-Path -LiteralPath $dir -PathType Container)) { continue }
foreach ($pat in $known[$d]) {
Get-ChildItem -LiteralPath $dir -Force -File -Filter $pat | ForEach-Object { Remove-Item -LiteralPath $_.FullName -Force; $n++ }
}
}
foreach ($d in 'app\__pycache__', 'app', 'scripts', 'launcher', 'uninstall') { # 비었을 때만
$dir = Join-Path $App $d
if ((Test-Path -LiteralPath $dir) -and -not [IO.Directory]::EnumerateFileSystemEntries($dir).GetEnumerator().MoveNext()) { Remove-Item -LiteralPath $dir -Force }
}
Say "업데이트: 이전 배포 파일 $n 개 정리 (그 밖의 파일은 남김)"
}
New-Item -ItemType Directory -Force -Path $App | Out-Null
$sd = New-Object System.Security.AccessControl.DirectorySecurity
# 소유자 · 그룹 · DACL 만 쓴다 (SACL 까지 쓰면 감사 특권이 필요함)
$sd.SetSecurityDescriptorSddlForm("O:BAG:SYD:PAI(A;OICI;FA;;;SY)(A;OICI;FA;;;BA)(A;OICI;0x1200a9;;;BU)",
[System.Security.AccessControl.AccessControlSections]'Owner, Group, Access')
[IO.Directory]::SetAccessControl($App, $sd)
foreach ($c in Get-ChildItem -LiteralPath $App -Force) {
& icacls $c.FullName /setowner "*$BA" /C /Q | Out-Null
if ($LASTEXITCODE -ne 0) { Say "소유자 변경 실패: $($c.FullName)"; exit 12 }
if ($c.Name -notin $UserDirs) {
# 관리자 쪽 하위 항목(apo\ 백업 등): 전부 관리자 소유, 명시 권한 없이 상속만
& icacls $c.FullName /setowner "*$BA" /T /C /Q | Out-Null
& icacls $c.FullName /reset /T /C /Q | Out-Null
if ($LASTEXITCODE -ne 0) { Say "권한 초기화 실패: $($c.FullName)"; exit 12 }
}
}
$acl = Get-Acl -LiteralPath $App
$rules = @($acl.GetAccessRules($true, $true, $Sid))
$bad = @($rules | ? { $_.IsInherited -or $_.IdentityReference.Value -notin @($SY, $BA, $BU) -or
($_.IdentityReference.Value -eq $BU -and ([int]$_.FileSystemRights -band $WriteBits)) })
if ($acl.GetOwner($Sid).Value -ne $BA -or -not $acl.AreAccessRulesProtected -or $bad.Count -gt 0) {
Say "잠금 확인 실패: owner=$($acl.GetOwner($Sid).Value) protected=$($acl.AreAccessRulesProtected) bad=$($bad.Count)"
exit 12
}
Say "잠금 완료"
exit 0
}
if ($Mode -eq 'Finish') {
foreach ($d in $UserDirs) {
$p = Join-Path $App $d
if (-not (Test-Path -LiteralPath $p)) { New-Item -ItemType Directory -Path $p | Out-Null }
if (Is-Link $p) { Say "데이터 폴더가 링크: $p"; exit 13 }
$has = @((Get-Acl -LiteralPath $p).GetAccessRules($true, $false, $Sid) | ? {
$_.IdentityReference.Value -eq $BU -and ([int]$_.FileSystemRights -band 0x2) -and $_.InheritanceFlags -eq 'ContainerInherit, ObjectInherit' })
if (-not $has) {
& icacls $p /grant "*${BU}:(OI)(CI)M" /C /Q | Out-Null
if ($LASTEXITCODE -ne 0) { Say "데이터 폴더 권한 실패: $p"; exit 13 }
}
}
# 관리자 권한으로 실행되거나 읽히는 것: 루트 파일, scripts\ app\ apo\ launcher\ uninstall\ 아래 전부
$items = @(Get-Item -LiteralPath $App -Force) + @(Get-ChildItem -LiteralPath $App -Force -File)
foreach ($d in 'scripts', 'app', 'apo', 'launcher', 'uninstall') {
$p = Join-Path $App $d
if (Test-Path -LiteralPath $p) { $items += Get-Item -LiteralPath $p -Force; $items += @(Get-ChildItem -LiteralPath $p -Recurse -Force) }
}
foreach ($it in $items) {
if (Is-Link $it.FullName) { Say "링크: $($it.FullName)"; exit 13 }
$acl = Get-Acl -LiteralPath $it.FullName
$o = $acl.GetOwner($Sid).Value
$w = @($acl.GetAccessRules($true, $true, $Sid) | ? { $_.AccessControlType -eq 'Allow' -and
$_.IdentityReference.Value -notin @($SY, $BA, $TI) -and ([int]$_.FileSystemRights -band $WriteBits) })
if ($o -notin @($BA, $SY) -or $w.Count -gt 0) { Say "확인 실패: $($it.FullName) owner=$o 쓰기권한=$($w.Count)"; exit 13 }
}
Say "확인 완료: $($items.Count)개"
exit 0
}
throw "알 수 없는 Mode: $Mode"

View File

@@ -1,11 +1,11 @@
# 마이크 APO 등록 · 해제 (관리자 권한). 설치 프로그램과 앱의 "마이크 다시 연결" 버튼이 실행한다.
# mic-apo.ps1 -Install [-Root <폴더>] [-From <이전 설치 폴더>] 마이크마다 APO 를 붙이고 오디오 서비스를 다시 시작
# mic-apo.ps1 -Uninstall [-Root <폴더>] 원래 설정으로 되돌림
# mic-apo.ps1 -Install [-Root <폴더>] 마이크마다 APO 를 붙이고 오디오 서비스를 다시 시작
# mic-apo.ps1 -Uninstall [-Root <폴더>] 원래 설정으로 되돌림
# <폴더> 는 apo\ 가 있는 곳이다. 설치 프로그램은 Program Files\VoiceChanger, zip 으로 풀어 쓰면 그 폴더.
# 바꾼 레지스트리 값의 원래 값은 <폴더>\apo\mic-apo-backup.json 에 남겨 두고 해제할 때 되돌린다.
# (v1.0.1 까지 고른 폴더의 apo\ 에 있던 백업은 설치 프로그램의 legacy.ps1 이 이 자리로 옮긴다)
# apo\ 는 관리자만 쓸 수 있는 폴더다 (일반 사용자가 백업을 바꿔 관리자 권한으로 레지스트리를 쓰게 만들 수 없게).
# -From: 이전 버전이 백업을 둔 앱 폴더 (21b4278 은 config\, v1.0.1 까지는 앱 폴더의 apo\). 값을 검증한 뒤 옮긴다.
param([switch]$Install, [switch]$Uninstall, [string]$Root, [string]$From)
param([switch]$Install, [switch]$Uninstall, [string]$Root)
$ErrorActionPreference = 'Stop'
if (-not $Root) { $Root = Split-Path -Parent $PSScriptRoot }
$Root = (Resolve-Path $Root).Path
@@ -16,8 +16,7 @@ $Dll = Join-Path $Root 'apo\VoiceChangerAPO.dll'
$Config = Join-Path $Root 'apo'
$BackupFile = Join-Path $Config 'mic-apo-backup.json'
$ListFile = Join-Path $Config 'mic-apo.json' # 앱이 읽는 "모듈을 붙인 마이크" 목록
$OldDirs = @($Root) + @(if ($From -and (Test-Path -LiteralPath $From)) { (Resolve-Path -LiteralPath $From).Path })
$OldListFiles = @($OldDirs | ForEach-Object { Join-Path $_ 'config\mic-apo.json' }) # 이전 버전(21b4278)의 목록 위치 (설치 · 제거 때 지움)
$OldListFile = Join-Path $Root 'config\mic-apo.json' # 이전 버전(21b4278)의 목록 위치 (설치 · 제거 때 지움)
# 실행 기록은 관리자만 쓸 수 있는 apo\mic-apo.log 에 남긴다 (앱이 실패 이유를 보여 줄 때 읽음)
$LogFile = Join-Path $Config 'mic-apo.log'
function Write-RunLog($m) { try { Add-Content -Path $LogFile -Value "[$(Get-Date -Format 'yyyy-MM-dd HH:mm:ss')] $m" -Encoding UTF8 } catch {} }
@@ -163,11 +162,8 @@ function Current-Original([string]$sub) {
function Load-Backup {
$b = @{}
$src = $BackupFile
if (-not (Test-Path -LiteralPath $src)) {
$old = @(foreach ($d in $OldDirs) { Join-Path $d 'apo\mic-apo-backup.json'; Join-Path $d 'config\mic-apo-backup.json' }) |
Where-Object { $_ -ne $BackupFile -and (Test-Path -LiteralPath $_) } | Select-Object -First 1
if ($old) { $src = $old; Log "이전 백업을 옮김: $old" }
}
$old = Join-Path $Root 'config\mic-apo-backup.json' # 이전 버전(21b4278)의 위치
if (-not (Test-Path $src) -and (Test-Path $old)) { $src = $old; Log "이전 백업을 옮김: $old" }
if (Test-Path $src) {
try { $j = Get-Content $src -Raw -Encoding UTF8 | ConvertFrom-Json } catch { $j = $null; Log "백업을 읽지 못함: $src" }
if ($j) {
@@ -185,11 +181,9 @@ function Load-Backup {
}
}
}
if ($src -ne $BackupFile) {
if ($src -eq $old) {
Save-Backup $b
Remove-Item -LiteralPath $src -Force -ErrorAction SilentlyContinue
$d = Split-Path $src # v1.0.1 까지의 앱 폴더 apo\ 는 비었으면 지운다
if ((Split-Path -Leaf $d) -eq 'apo' -and -not (Get-ChildItem -LiteralPath $d -Force)) { Remove-Item -LiteralPath $d -Force }
Remove-Item -Force $old -ErrorAction SilentlyContinue
}
return $b
}
@@ -276,7 +270,7 @@ function Install-Apo {
}
New-Item -ItemType Directory -Force $Config | Out-Null
ConvertTo-Json -InputObject @($done) -Depth 3 | Set-Content $ListFile -Encoding UTF8
Remove-Item -Force $OldListFiles -ErrorAction SilentlyContinue
Remove-Item -Force $OldListFile -ErrorAction SilentlyContinue
Restart-Audio
if ($done.Count -eq 0) { throw '마이크를 하나도 연결하지 못했습니다' }
}
@@ -301,7 +295,7 @@ function Uninstall-Apo {
foreach ($sub in @("SOFTWARE\Classes\AudioEngine\AudioProcessingObjects\$Clsid", "SOFTWARE\Classes\CLSID\$Clsid")) {
if ($HKLM.OpenSubKey($sub)) { $HKLM.DeleteSubKeyTree($sub) }
}
Remove-Item -Force (@($BackupFile, $ListFile) + $OldListFiles) -ErrorAction SilentlyContinue
Remove-Item -Force $BackupFile, $ListFile, $OldListFile -ErrorAction SilentlyContinue
Restart-Audio
}